Tubing Wire Drawing Machines

Products Services-

Graphite For Nozzles And Thoats

VM/MA70 - Automatic Crusching Mill

Graphite Degassing Units are systems used for degassing hydrogen from molten aluminum. During the smelting process of aluminum, or aluminum alloys, hydrogen is produced through a chemical reaction with steam. Diffused throughout the aluminum, it creates voids, and ultimately cause structural defects. It will effectively weaken the casting. To combat this unwanted effect, most aluminum foundries will inject an inert gas, such as nitrogen or argon, which draws the hydrogen out from the aluminum / aluminum alloy.

VM/TRI 30 - Hydraulic Draw Bench 30000 Kg

TRI30 is the ideal draw bench to process tubes and bars with circular cross section or with complex profile, capable to ensure high quality standards and accuracy of the finished product. Technologically advanced thanks to the use of top-level components and innovative design solutions covered by patent, the TRI30 draw bench is fully controlled by PLC for both working phases and safety protection.

VM/MRT5M - Hiperbolic Tube Straightening Machine - 5 Groups

MRT5M is an hyperbolic straightening machine ideal to process tubes or rods made of steel or other metals, hot or cold drawn, with diameters from 10 to 30 mm. The device is equipped with 5 straightening groups consisting of hyperbolic pairs of rollers mounted obliquely and having an inclination opposed to each pair. The orientation of the axes, combined with the hyperbolic geometry of the rollers allows the profile to forward rotating. More info on the below data sheet.

VM/TTF1 - Automatic Wedding Ring Sawing Machine

VM/TTF1 is an automatic cutting unit designed for sawing pieces of pipe having an external diameter of 70 mm and a maximum thickness of 10 mm, generally used for the production of wedding rings and bracelets. The cutting is done through a circular blade mounted on a advancing device while the pipe is anchored to a rotating mandrel through pneumatic clamping calipers. More info on the below data sheet.

VM/TRI 5 - 5.000 Kg Hydraulic Draw Bench

Hydraulic Draw Bench Mod. VM/TRI 5 work lenght on request from 3 to 6 metres The hydraulic carriage assembly is driven by bearings and the drawing pull is perfectly in axis with the drawing die. Opening and closing movements of the pliers by hydraulic cylinder

VM/KTF10 - Hydraulic Drawing Bench Kit

KTF10 is a very compact draw bench to process semi-finished tubes or bars having a maximum total length of 1 meter ready for turning or rolling, capable to ensure high quality standards and accuracy of the final product. Technologically advanced thanks to the use of top-level components and innovative design solutions covered by patent, the KTF10 kit has the truck carries pliers perfectly aligned with the hole of the drawn in order to eliminate any formation of bending effects on the metal structure. More info on the below data sheet.

VM/10P - 10P2 - 10 PASS WIRE DRAW ADHUSTABLE OR FIX SPEED

The VM/10P is a multi-pass straight-line drawing machines designed to process ferrous, non-ferrous and noble wires, which is available in two versions: variable speed, adjusted via potentiometer, or 2 fixed speeds (VM/10P2). In both cases the movement is ensured by a three-phase motor with alternating current transmission through reducer in oil bath and is able to guarantee a drawing speed of up to 110 m/min. More info on the below data sheet.

VM/6P - 6P2 - 6 Pass Wire Draw Adjustable Or Fix Speed

The VM/6P is a multi-pass straight-line drawing machines designed to process ferrous, non-ferrous and noble wires, which is available in two versions: variable speed, adjusted via potentiometer, or 2 fixed speeds (VM/6P2). In both cases the movement is ensured by a three-phase motor with alternating current transmission through reducer in oil bath and is able to guarantee a drawing speed of up to 80 m/min. More info on the below data sheet.

VM/CR- Wind Line Machine

This machine produces wire line, which is obtained by twisting several wires around a wire or a strand. Speed of twisting can be adjusted according needs. Up to 12 coils (plus a central one) can be set on the revolving support. Moreover, the coils are provided with a clutch that allows you to process also very thin wires. The machine is equipped with two motors controlled by an inverter: one is designed for a working rate of up to 5 mt./min. (set speed remaining constant), while the other can achieve a spinning rate of 500 rv/min.

VM/CR- Wind Line Machine

This machine produces wire line, which is obtained by twisting several wires around a wire or a strand. Speed of twisting can be adjusted according needs. Up to 12 coils (plus a central one) can be set on the revolving support. Moreover, the coils are provided with a clutch that allows you to process also very thin wires. The machine is equipped with two motors controlled by an inverter: one is designed for a working rate of up to 5 mt./min. (set speed remaining constant), while the other can achieve a spinning rate of 500 rv/min.

VM/BVE - 2 Pass Bull Block Adjustable Speed

The Bull-Block series is a line of machines for drawing low and medium carbon steel wires and noble wires without torsion and slipping having small and medium size diameter; the wires are pulled through the dies by a power-operated drum. The units are available on double-speed version (B2) or with electronic speed adjustment (B2VE, 3 or 5,5 hp) and ensure a production rate up to 25 m/min thanks to the use of capstans with diameter from 250 up to 300 mm. More info on the below data sheet.