Media For Circular Vibrator

Products Services-

Microbrill Polishing Media

MICROBRILL is a product that, combined with the shining compounds suitable for each type of metal, has the remarkable advantage to eliminate the problem of oxidation that usually involves the traditional stainless steel balls AISI 420.

With this product there is no transfer or oxidized metal during the process, therefore no more acid degreasing and a minor discharge of water to drain. The remarkable hardness and the low specific gravity permit to obtain a very fine finish without the “orange peel” phenomenon that frequently involves the traditional treatments with stainless steel balls.

Another important characteristic of this material is that it allows the processing of very thin and fragile objects (i.e.: in the gold industry, the “gap”), assuring with one single step smoothing and shining without modifying the colour, emphasising the natural characteristics of the metal.

AISI 420/C STAINLESS STEEL BALLS

The steel quality of the stainless steel balls is AISI norm guaranteed against oxidation, when used with MF products to be used in the vibration and rotation machines with water and surface-active compounds only for the shining step.

AISI 420/C STAINLESS STEEL PLANET GEARS

The steel quality of the stainless steel planet gears is AISI norm guaranteed against oxidation, when used with MF products.

They are used when you need a penetration on the undulated shapes. To be used mixed with balls, needles and stubs in the vibration and rotation machines with water and surface-active compounds for the shining step. (VILUX)

AISI 304 STAINLESS STEEL CYLINDERS

The steel quality of the stainless steel cylinders is AISI norm guaranteed against oxidation, when used with MF products. This cylindrical shape is used when you need a penetration on right angles or undercut shapes. They are used mixed with balls, planet gears and stubs in the vibration and rotation machines with water and surface-active compounds for the shining step.

AISI 304 STAINLESS STEEL STUBS WITH 45° CUT EDGE

The steel quality of the stainless steel stubs is AISI norm guaranteed against oxidation, when used with MF products. Their particular shape is used when you need a penetration on right angles or undercut shapes. They are used mixed with balls, planet gears and stubs in the vibration and rotation machines with water and surface-active compounds for the shining step.