Induction Gold Bar Machine
Induction Gold Bar Machine
Technical Details
This machine is designed for small gold-refineries, but complete with all features for industrial use. It is complete of:
- Heating inductor
- Frequency Static Converter 10KW
- Medium Frequency Power Plant (18 –30 KHz) with No noise IGBT circuit
- Cooling area with Gas protection (Argon/Nitrogen)
Working Cycle
- Load the gold grains into the graphite ingot mould, previously weighted.
- Push the ingot mould into the furnace by a thermocouple
- Start the cycle pushing the start button on control panel
- The ingot mould will be pushed into the cooling area automatically once reached the set melting temperature
- After cooling the operator will remove the ingot mould from cooling zone of machine.
| Mod. 1KG BAR | |
| Power | 12 KVA |
| Power of heating | 10 KW |
| Cos φ | 0.94 |
| Voltage | 3 x 400V 50Hz |
| Input Water Temperature | 20 ÷ 30 °C |
| Water Pressure | 4,5 ÷ 5 bars |
| Medium water fall t° input/output | 10 °C |
| Total required water flow rate:
converter + inductor |
Min 15 Lt/min |
| Medium water fall t° input/output | 10 °C |